A Guide Of Waterjet Cutting Machines

  • By:
  • Date:2021/01/23

Waterjet cutting is most commonly used for cutting out holes in different materials, especially those made of plastic or metal. The waterjet cutting machine uses pressure to apply the water for cutting, and because the process is very forceful, there is a danger of pieces of the material being pushed aside or getting dislodged. In some cases, the holes created may not line up with the original opening, and this will cause the material to be cut incorrectly. It may also result to parts becoming deformed.

The basic components of a waterjet cutting machine are the pump, the cutter, and the collector. The pump is responsible for activating the cutter, which is then placed on the workpiece and covered with a cover. The pump also holds the pressurized air in the cutter, which will be used for circulating the water and air, as well as to provide a cooling system.

In waterjet cutting technology, there is a line of concentric blades that will move at different speeds and cut different types of material. There are five basic categories of blades for the machine, which include straight, sloping, diamond blade, and polygonal, all of which can cut various types of plastics and polymers. For the smoothest cuts, the diamond blade is considered the best option, as it is able to create an extremely smooth finish on the surface that it cuts.

Waterjet cutting machines are generally used for cutting out patterns that have a grain to them, and these are called planer waterjets. These machines also feature what is known as the erosion process, where the water is forced through the machines in a back and forth motion. When using the waterjet cutting machine to cut plastic and other materials, it is important to be aware of the erosion process, as it is part of the process that will affect the properties of the final product that you are cutting. There are certain types of plastics that will have different degradation factors, so it is important to be aware of what these are when using the machines.

When using the waterjet cutting machines, it is important to take note of the heat affected zone, as it controls how the material will be cut when being cut. To get the best results, the water should be flowing against the metal that it is attacking, as the flow of the water must be very even. For any type of design or pattern, this heat affected zone should be a minimum of a half-inch, as this is the ideal zone for cutting the material without too much distortion. If the waterjet cutting machine comes with a mesh feed, then this will be especially important to take into consideration when setting up the heat affected zone on the final piece.

Waterjet cutting machines are not only suitable for intricate patterns and designs, but they are also suitable for cutting many different types of materials. Most of the time, these machines are used in the job shop, though there are some waterjet cutters that can also be used outside on various websites. With all the various types of materials that can be cut with a waterjet cutter, there is a need for the proper size of cutter for the job that is at hand. For example, the small waterjet cutters found on the small waterjet cutting machine shops are not appropriate for larger jobs where heavier materials would need to be cut. This type of cutter is usually considered a piecewise rotating cutter.

One thing that should be considered when selecting water jet cutting machines is the environment that the machine shop is located in. Some people work in very dusty areas, which is not conducive to working with abrasive water stream materials. Other shops may have very cold environments that are not conducive to working with abrasive water stream materials as well. The location of the waterjet cutting machine shop is crucial to the success of any project that is related to water stream cutting. If the machine shop is not located in an ideal environment, a business owner may see their profits drop significantly.

Water jet cutting machines are fast gaining popularity in many parts of the world. If you are interested in purchasing one of these machines for your business, then you need to do your research about water jet manufacturers before making any decision. There are many waterjet cutting machines that are available to purchase, and knowing what is available will help you make the best possible choice for your business.





Teenking CNC Machinery Co., Ltd.

We are always providing our customers with reliable products and considerate services.


If you would like to keep touch with us directly, please go to contact us

  • Home


  • Tel


  • Email


  • Contact